KCV Labs
Under Monitor Eyeglasses Tray Holder
Under Monitor Eyeglasses Tray Holder
Couldn't load pickup availability
In stock
Most orders ship within a few business days from our workshop or partner warehouses, with delivery estimates shown at checkout.
- Field tested gear we use ourselves
- Tracked shipping on every order
- Simple 30 day returns with real support
Park your glasses out of the way, but always within reach, with a low-profile tray under your monitor.
If your glasses keep getting buried on your desk or knocked to the floor, this under-monitor holder gives them a dedicated home. It installs in minutes with adhesive, keeps frames centered and stable, and helps protect lenses with a smooth interior surface.
- Less desk clutter: Minimal under-monitor storage keeps your glasses in one consistent spot.
- Helps prevent scratches: Smooth tray surface keeps lenses off the desk.
- Stable placement: Slim front lip helps reduce sliding and accidental bumps.
- Fast install: Includes a pre-cut double-sided adhesive strip.
How to use
- Prep the surface: Degrease the underside of the monitor with isopropyl alcohol and let it dry.
- Apply the adhesive: Attach the included tape to the tray, then position the tray under the monitor.
- Press firmly: Hold pressure for 30 seconds.
- Let it cure: Allow the adhesive to cure before placing your glasses inside.
Tip: For a permanent mount (after confirming placement), hot glue is an option.
What's included
- 1x Under-monitor eyeglasses holder tray
- 1x Pre-cut double-sided adhesive strip
Printed in small batches. Once this run sells out, the next batch may change based on feedback from our crew.
Fit & requirements
- You’ll need: A clean, flat underside mounting surface (alcohol wipe recommended).
- Works best with: Flat-bottom monitors and standard desk setups.
- Fit check: Confirm you have enough clearance under the monitor for the tray depth and your frames.
- Color options: White, Black, or Custom (additional fee).
- Not ideal for: Textured, dusty, or uneven undersides where adhesive cannot bond well.
Specs
| Material | PLA |
|---|---|
| Dimensions | 154.34 mm x 111.54 mm x 20.00 mm | 6.08 in x 4.39 in x 0.79 in |
| Weight | 55.52 g |
Care
- Cleaning: Wipe clean with a soft cloth. Use mild soap if needed, then dry thoroughly.
- Heat: Avoid prolonged exposure to high heat and direct sunlight.
- Adhesive bond: If the tray loosens, replace the tape and reinstall it on a clean surface.
3D-printed parts may show subtle layer lines and minor cosmetic variation. Adhesive performance depends on surface prep and environment.
Open source attribution
Physical print of “Under Monitor Eyeglasses Holder” by HiLife. Used under the Creative Commons Attribution ShareAlike 4.0 International (CC BY SA 4.0) license. Original model: view file . No changes were made to the model geometry. No endorsement or affiliation implied.
